Snow leopard server setup primary dns name

DNS Enabler Snow. DNS Enabler for Snow Leopard, when setting up a secondary name server, can now automatically display the updates to the secondary name server when the zone information in the primary name server changes.

And it can set up multiple MX records pointing to an external host that is acting as the mail server for the hosts in the managed domain. WebMon for Snow Leopard can now set up multiple virtual domains in addition to the main domain. The new WebMon also sets up server-side includes and execCGI for the web server so that developers can have an even richer platform for web software development.

Plus something that has been asked for : the ability to add custom Apache directives to the ones WebMon builds.

Either way, you should be able to see this : Click the Save button and you can now select the "Update Server" check box, below, enter the domain name of the DNS Server, enter the host name of the machine DNS Agent is monitoring, and click the Start button which will then change its label to Restart to show that DNS Agent monitoring daemon is launched and running. Release Log 1. DNS Agent released. As I said, things seem to work pretty well without DNS configured, but it would be nice to do it right and have a little more control and flexibility.

Join our community to see this answer! Unlock 2 Answers and 3 Comments. Andrew Hancock - VMware vExpert. See if this solution works for you by signing up for a 7 day free trial. What do I get with a subscription? With your subscription - you'll gain access to our exclusive IT community of thousands of IT pros. We can't always guarantee that the perfect solution to your specific problem will be waiting for you.

If you ask your own question - our Certified Experts will team up with you to help you get the answers you need. MX 20 shining. The example above also shows how you can indicate to the DNS system that an external mail host mailstore. DNS Enabler can handle the general case where more than one block of IP addresses in the same sub-net can possibly be delegated to your name server.

A reverse lookup on the IP address Having delegated a sub-block from of IP addresses from In this case, your name server's answer would be "smtp.

A normal lookup of the name "smtp. So with things set up this way, a suspicious destination mail server will have its checks confirmed that your smtp server is really what it purports to be, which is probably what this whole exercise had been meant to serve. Setting up a Secondary Name Server. DNS Enabler also allows you to set up a secondary slave name server.

First, use the Save menu item in the File Menu on the Primary Name server, to make a copy of the configuration. Then copy this to the machine that will act as the Secondary Name Server in our case, wormhole. Run DNS Enabler on this secondary machine, and use it to open the configuration you've just copied over.

There is a new feature with DNS Enabler for Snow Leopard - it will monitor the zone files for updates coming in from the primary server. So when you make a change to the primary server terminator. Network Notes : You need to make sure that the network set up is correct, i. DNS Enabler can also set up multiple secondary slave name servers for a single primary name server. Just enter the list of slave server host names into the Secondary Name Server field of the machine acting as the primary server and this will tell the primary name server to notify all of these secondary servers whenever there is a change in the zone data that it is managing and it will transfer these updates to the slave servers automatically.

In order to establish that it has the necessary authorisation to update the DNS Server, the DNS Agent needs to have an authorisation key installed that it has obtained from the server. Drag the Authorisation Key, as represented by the icon on the bottom-right hand corner of the dialog box, to the machine running DNS Agent, whose IP address is being tracked. You can drag the key file to the server's desktop and transfer it to the client machine via file-sharing or via email. Save the key and follow the instructions on the DNS Agent web page.

In a couple more steps which involves entering values for the address of the DNS Server and the host name you are updating for , you are done, and you can quit the DNS Agent, which leaves a daemon running, even across shut-downs and reboots, that will always update the DNS Server with that client's current IP address. If you leave the DNS Enabler Snow application on in the server, you can see the IP address updates appearing automatically, but a few minutes late say, 10 minutes later.

Why so late? This is because the updates are cached by the server but not written to disk straightaway, in case a lot of updates come in at the same time. But they're registered immediately by the server, and you can check that it's true if you do a dig on the server in Terminal. The zone files are batch-updated later. When they do get updated, you'll see that reflected on the DNS Enabler interface immediately. Bonjour Wide-Area Services.

Nov 10, AM in response to capaho In response to capaho Many thanks for your help with this - much appreciated. I have just completed a fresh install. Can I just check I have got the setup correct? Thanks again for all - really want to get this right now to avoid problems in the future. Best wishes, Andrew. From the terminal window enter: sudo changeip -checkhostname and make sure that the server names and DNS names match.

You can post the response here if you like. Yes - or you can normally use the IP address of your router. User profile for user: andrewpndavies andrewpndavies. I may have solved it - my router has the option to type a name for each device it assigns an ip to a hostname? When the problem first popped up, it had lost all it's values - re-entering them has helped.

Only frustrating thing now is that entering my full domain name into a web browser from within the the local network takes me to the config page of my router - where I'd rather it took me to my server via port forwarding - as it does when outside the LAN.

Thanks again, Andrew. It seems that you don't have a reverse name in your DNS server. If you are using you osx machine as a DNS server i. Very important that you get this working before moving to next stage.

User profile for user: Jeff Kelleher Jeff Kelleher. Nov 10, PM in response to andrewpndavies In response to andrewpndavies If I read this correctly - when the setup assistant asks you for a primary domain name you entered an IP address? You need to have a FQDN for your server. This means you need a domain.

You can make one up so long as you don;t pick a domain name that exists in real life unless you have one registered already. If you do, use that. Assuming you're not using a registered domain on your LAN, when you setup the server, the primary domain would be, say, flair.

For the upstream DNS, i.