How to install stone pavers driveway

If you are wondering how to lay pavers for a driveway , read more about it below! Before you start your project, the first thing you need is to plan the size of your driveway. A driveway must be large enough to easily park your cars. Generally, the one-way driveway width is enough for those who own only average size cars. A two-way driveway width installation is required for those who own larger vehicles. Single car driveways can be from 10 to 12 feet, while double car driveways can be between 20 to 24 feet wide, but if you need space for parking two cars, consider the width of 24 feet.

Most people plan driveways using 18 to 20 feet of length for each car or 22 to 24 feet for big vehicles. Step 2: After compacting the soil, lay geotextile fabric to allow the water to pass without disturbing the particles underneath. Geotextile fabric is very effective in heavy traffic areas, like driveways, and highly recommended to prevent soil movement beneath the pavers surface and increase the durability of the pavers system.

Step 3: Lay 6 inches of gravel on top of the compacted soil. If necessary, slightly increase or decrease the thickness of the gravel base. If your driveway design is irregularly shaped, you can cut the restraints in order to follow the edges of your design.

Step 5: On the top of the gravel base, lay approximately 4 inches of clean sand. The sand is the material that holds your pavers in place. Level the sand carefully with a straight board and compact it with a hand tamper. Then, use a wide-mouthed broom to sweep this gravel between the interlocking pavers and fill up all the gaps.

You can then sweep the excess to clean off the surface and use a plate compactor to further push the pavers firmly in place. Now you know how to install a brick paver driveway in four steps. Let the surface breathe and your driveway shall be ready for use soon. Make sure you maintain the pavers by preventing the accumulation of debris.

In case of oil and grease stains, pressure washing usually helps. Every few years, you will have to reseal the paved surfaces to ensure that everything stays in place and in perfect working condition. Strength and durability are two important factors to consider when choosing pavers for your driveway.

The surface should be able to handle weather extremes as well as vehicle pressures constantly. So, you need to choose an option that is easy to maintain and difficult to damage. If you want to learn more about laying driveway pavers or renting the right equipment for this DIY project, speaking to paver experts can be a good idea. You can contact professionals for a free consultation and ask for help and advice so that you can be sure of the quality and durability of your driveway after the completion of your project.

Step 2: How to do a Driveway with Pavers: Setting the Base After the planning and getting the measurements right, it is time to lay the foundation for concrete paver driveway installation. Step 4: How to Install a Brick Paver Driveway: Filling the This is the finishing layer to add the final touches to your paver driveway installation. Recent Posts. This field is for validation purposes and should be left unchanged.

Fortunately, that same softness makes asphalt easy to work with if you want to dress up and protect the edges with pavers. Real cobblestone pavers , often called Belgian block, are made of granite and typically measure 4 to 5 inches thick, 7 to 9 inches wide, and 9 to 10 inches long.

A paver edge looks best if it is installed along both sides of the driveway, but you can do just one side if that suits your needs. It's usually best to set the pavers on-edge rather than flat. Create a cutting line along the edge of the driveway, using a chalk line. Secure one end of the line with a nail, have a helper hold the other end on the driveway so that the line is taut, and then give the string a quick snap from the middle.

Rent a handheld cutoff saw with a diamond blade. Ask the person you rent from to give you a lesson on how the saw works they're pretty easy to use. You can also find short online videos about cutting asphalt.

If this part of the job scares you, hire someone to do the cutting; it may not cost you much more than the rental fee. Follow all safety precautions when using a cutoff saw. Cut through the asphalt along the chalk line. Then, use a strong garden spade to remove the cut section. The saw probably won't be able to cut near the garage, so use a brick set chisel and small sledgehammer to finish the job. You can also use the chisel to remove any other asphalt that the saw missed.

Use the garden spade to dig a trench along the edge of the driveway. Dig deep enough so that more than half the stone will be beneath the driveway surface, plus 1 inch for concrete. Make the width several inches wider than the width of the paver blocks. Alternatively, you can set the depth of the trench so that the edging ends up flush with the driveway surface. Drive wood stakes at each end of the trench.

Tie a string line to the stakes, setting the line at the desired height of the edging.